SE58 Closed head Tubing Tong is with variable torque, hydraulic lift, Pressure oil bath lubrication, hardened internal gears, roller chain final drive and two-speed operation. Because they are closed head, the power tong stay on the pipe all the way up. You save time because you don’t have to remove and replace the tongs on the pipe after each joint is pulled. Every joint is gripped with a uniform, predetermined torque between 0.41～8.13kN.m (300～6000 ft. lbs), which is controlled by setting the pressure relief valve. It is interchangeable with foster tubing tong. We are able to provide same Jaw and bushing parts.

Technical Parameter

a. Application Rang:   60～89mm (2³/₈″ ～ 5″） tubing

b. Maximum passing diameter:  127mm (5″)

c. Torque:  0.41～8.13kN.m (300～6000 ft. lbs)

d. High Gear Rated Torque:  0.41～1.76kN.m (300～1300 ft. lbs)

e. Low Gear Rated Torque:  8.13kN.m (6000 ft. lbs)

f. High Gear Rated Speed:  126r/min   Low Gear Rated Speed:  27r/min

g. Total Length：1295mm (51″)      Thickness of Master Tong: 242mm (9¹/₂″)    

High of Master Tong and Backup Tong:  425mm (16³/₄″)

h. Maximum dimension of glide elevator:  762mm (30″) 

i. Versa dint of the knot tail rope:  930kg (2056lbs)

j. Distance of between Tubing center and the knot tail rope:  762mm (30″)    

k. Weight：   456kg (1000lbs)

l. Rated System Pressure:  13MPa (1880psi)

m. Maximum Oil Supply:  126L/min (33.5gpm)

SPARE PARTS FOR FOSTER 58-93R CLOSED HEAD HYDRAULIC TUBING TONG